Assessment of Chemical Risks on the Health of Coppersmiths and on the Environment: Case of Bardo in Constantine (Algeria)

Nesrine Hadj Mokhnache, Aïda Djeghar, Hana Bouchoucha, Sihem Arris

Abstract


Certain traditional industries and crafts are major sources of environmental pollution and health risks. Copperware craft is one of those activities that exposes artisans to numerous health risks, including chemical hazards. The current study aims to identify the risks associated with the workshops of the Bardo site in Constantine, Algeria, and to analyze the concentration of heavy metals in samples of water used for the treatment of copper in order to evaluate their environmental impact. The methodology included interviews with 15 coppersmiths, as well as a chemical analysis of three water samples from the workshops. The analysis measured the pH level, chemical oxygen demand (COD), total organic carbon (TOC), and turbidity. It also measured the concentration of heavy metals, such as copper, arsenic, zinc, lead, cadmium, and total chromium. The results revealed that 73% of artisans suffer from respiratory problems and allergies due to inadequate use of protective equipment. Analysis of the samples showed significant acidity ranging from 0.2 to 1.5, high COD values reaching 6,176 mg/L, and significant excesses from environmental standards for arsenic (0.1031 mg/L), cadmium (0.0075 mg/L), and total chromium (0.007 mg/L). As these polluted waters are discharged directly into the environment, they pose a danger to Oued Rhumel, located downstream from the workshops, where high concentrations of heavy metals such as copper (3125 mg/kg), zinc (1570 mg/kg), and cadmium (199.5 mg/kg) have been detected in the sediments. This craft presents a dual threat to both human health and the environment.  Therefore, the study recommends strengthening safety measures, treating water before discharge, and opting for less hazardous alternatives.

Keywords: health risk, environmental risk, heavy metals, pollution, copperware craft, Constantine.

© 2026 Serbian Geographical Society, Belgrade, Serbia.

This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Serbia.


Full Text:

PDF

References


Afri-Mehennaoui, F. Z., Sahli, L. & Mehennaoui, S. (2009). Evaluation de la contamination par le cadmium, le plomb et le zinc de l’eau, des sediments de l’Oued Rhumel et son sffluent le Boumerzoug, et leur transfert vers une plante semi-aquatique: Rorippa nasturtium-aquaticum (L.). Sciences & Technologie, (29), 45-55.

American Public Health Association (2017). Standard Methods for the Examination of Water and Wastewater. Washington: American Public Health Association.

Arris, S. (2008). Etude expérimentale de l’élimination des polluants organiques et inorganiques par adsorption sur des sous produits de céréales (Doctoral dissertation).

Ayangbenro, A. S., & Babalola, O. O. (2017). A new strategy for heavy metal polluted environments: A review of microbial biosorbents. International Journal of Environmental Research and Public Health, 14(1), Article 94. https://doi.org/10.3390/ijerph14010094

Boradkar, P. (2022). Copper in Tambat Ali: Design, craft, and the transformative properties of a material in Pune, India (Doctoral dissertation).

Bouchala, F., Boos, A., Hamadouche, M., Benboudiaf, S., & Azzouz, M. (2023). Évaluation de l’exposition professionnelle au plomb, cadmium et arsenic dans une usine de fabrication et recyclage de batteries acides au plomb. Toxicologie Analytique et Clinique, 35(3), Article S95. https://doi.org/10.1016/j.toxac.2023.08.053

Chabour, N. (2018). L’impact de la dinanderie du Bardo sur l'environnement.

Dia, S. A., Mohamed, A. S., Gueye, M., Ndoye, E. O., Gaye Fall, M. C., Soumah, M. N., & Ndiaye, M. (2017). Évaluation des risques professionnels dans le secteur de la fonderie artisanale d’aluminium à Dakar. Archives des Maladies Professionnelles et de l'Environnement, 78 (5), 454-459. https://doi.org/10.1016/j.admp.2017.03.009

Dosmukhamedov, N., Zholdasbay, E., & Argyn, A. (2023). Extraction of Pb, Cu, Zn and As from fine dust of copper smelting industry via leaching with sulfuric acid. Sustainability, 15 (22), Article 15881. https://doi.org/10.3390/su152215881

Felix, A. O., Adams, S., Owusu, A. E., & Akunai, A. A. (2018). Heavy metal concentration and anthropogenic activities at artisanal shops at Suame industrial area, Ashanti region, Ghana. Journal of Scientific Research and Reports, 19(4), 1-6. 10.9734/JSRR/2018/41175

Förstner, U., & Wittmann, G. W. (1981). Metal pollution in the aquatic environment. Berlin: Springer.

Fu, F., & Wang, Q. (2011). Removal of heavy metal ions from wastewaters: A review. Journal of Environmental Management, 92(3), 407-418. https://doi.org/10.1016/j.jenvman.2010.11.011

Fytianos, G., Tsikrikis, A., Anagnostopoulos, C. A., Papastergiadis, E., & Samaras, P. (2021). The inclusion of acidic and stormwater flows in concrete sewer corrosion mitigation studies. Water, 13(3), Article 261. https://doi.org/10.3390/w13030261

Gharib, A., & Maher, M. A. (2018). A case study of copper-arsenic ewer from the Egyptian museum in Cairo, Egypt. Journal of the General Union of Arab Archaeologists, 3(1), 1-25. DOI:10.21608/jguaa2.2018.2766.1009

Hiscox. (2023). Liste des métiers à risques & défis de l'artisanat. Retrieved from https://www.hiscox.fr/blog/metiers-artisanat-art-actualit%C3%A9-risques

International Labour Organization. (2025). Chemicals in the health care environment. Retrieved from https://iloencyclopaedia.org/part-xvii-65263/health-care-facilities-and-services/chemicals-in-the-health-care-environment

Jarup, L. (2003). Hazards of heavy metal contamination. British Medical Bulletin, 68(1), 167-182. https://doi.org/10.1093/bmb/ldg032

Jounin, N. (2006). La sécurité au travail accaparée par les directions - Quand les ouvriers du batiment affrontent clandestinement le danger. Actes de la Recherche en Sciences Sociales, 165, 72-91.

Journal Officiel de la République Algérienne (2006). Décret exécutif n° 06-141 définissant les valeurs limites des rejets d'effluents liquides industriels. Algiers: Journal Officiel de la République Algérienne.

Laidi, O., Merzouki, M., El Karrach, K., & Benlemlih, M. (2015). Brassware wastewater treatment optimization in the city of Fez with sequencing batch reactor using activated sludge. Journal of Materials and Environmental Science, 6(6), 1562-1569.

Loughlaımı, I., Bakher, Z., Toukhmi, M., & Zouhri, A. (2025). Evaluation and comparative analysis of heavy metal leaching efficiency by nitric acid, perchloric acid and sulfuric acid from Moroccan phosphate solid waste. Journal of the Turkish Chemical Society Section B: Chemical Engineering, 8(1), 47-58. https://doi.org/10.58692/jotcsb.1553183

Margossian, N. (2006). Traité du risque chimique: De l'évaluation à la prévention. Paris: Techniques de l'ingénieur.

Mazri Benarioua, M. (2022). L'artisanat traditionnel dans la médina de Constantine: Approche sur les effets de lieu et de milieu. Les Cahiers du Cread, 38(4), 5-35. DOI:10.4314/cread.v38i4.1

McLean, J. E., & Bledsoe, B. E. (1992). Behavior of metals in soils. Ground Water, 1-25.

Nriagu, J. O., & Pacyna, J. M. (1988). Quantitative assessment of worldwide contamination of air, water and soils by trace metals. Nature, 333, 134-139. https://doi.org/10.1038/333134a0

Nuhu, A. A., Sallau, M. S., & Majiya, H. (2014). Heavy metal pollution: The environmental impact of artisanal gold mining on Bagega village of Zamfara state, Nigeria. Research Journal of Pharmaceutical Biological and Chemical Sciences, 5(6), 306-313.

Organisation Mondiale de la Santé (1986). Directives de kwaliteit pour l’eau de boisson: Criètères d’hygiène et documentation à l'appui. Genève: Organisation Mondiale de la Santé.

Quezada, V., Villagrán, G., Calisaya-Azpilcueta, D., & Marín, N. (2024). Effect of pretreatment on a copper concentrate with high arsenic content. Minerals, 14(4), Article 419. https://doi.org/10.3390/min14040419

Rezki, A., & Abidi, S. (2024). Reviving anthropological heritage as a resource for cultural tourism in Algeria. International Journal of Early Childhood Special Education, 16(5), 926-940. DOI: 10.48047/intjecse/v16i5.96

Sennett, R. (2008). The craftsman. New Haven & London: Yale University Press.

Smedley, P. L., & Kinniburgh, D. G. (2002). A review of the source, behaviour and distribution of arsenic in natural waters. Applied Geochemistry, 17(5), 517-568. https://doi.org/10.1016/S0883-2927(02)00018-5

Street, R. A., Goessler, W., Naidoo, S., Shezi, B., Cele, N., Rieger, J., & Mathee, A. (2020). Exposure to lead and other toxic metals from informal foundries producing cookware from scrap metal. Environmental Research, 191, 1-9. doi: 10.1016/j.envres.2020.109860

Tchounwou, P. B., Yedjou, C. G., Patlolla, A. K., & Sutton, D. J. (2012). Heavy metals toxicity and the environment. EXS, 101, 133-164. doi: 10.1007/978-3-7643-8340-4_6

World Health Organization. (2022). Preventing disease through healthy environments: Exposure to cadmium: A major public health concern. Retrieved from https://iris.who.int/bitstream/handle/10665/329480/who-ced-phe-epe-19.4.3-eng.pdf


Refbacks

  • There are currently no refbacks.